Category Archives: Slab Leaks

Plumber Terms: A to Z

Plumber terms every Homeowner should know

Plumber terms a to zPlumber terms can be confusing to many property owners. However, having some understanding of these and the associated concepts will help you maintain your home’s plumbing better and even gain insights into the various tasks that plumbers do. Here are the ABCs of plumbing that you need to know.

Absorption system

This system’s primary purpose is to boost the efficiency of a septic tank in catching/collecting solid waste.

Aerotor

Also known as baggles, aerators are used to mix both air and water in a faucet in order to reduce splashing.

Apron

This refers to the side of the bathtub that goes from the floor to the top rim.

Backflow

Backflow occurs when water from one system contaminates other parts of the main distribution system.

Backflow preventer

This refers to the device that helps prevent contamination of water between different systems.

Balancing valve

This refers to the valve connected to water heaters. It controls water flow and balances heat.

Bathroom fixtures

These refer to different devices that either supply or dispose water. These include your sink, toilets, faucets and bathtubs.

Bidet

A bidet is a bathroom fixture that is used to cleanse the body by spraying water.

Catch basin

The primary purpose of this grated container is to catch storm water run-off and prevent debris from going to natural bodies of water.

Cistern

Cisterns are storage tanks that are typically buried underground. Their main function is to collect rain water.

Corroded pipes

Pipes corrode when the water in a household has low pH.

Cross-connection

This refers to a connection that facilitates the entry of water between systems.

Cross-connection control system

This system acts as a barrier against wastewater which can contaminate other systems.

Face plate

This device can either be decorative or functional and is used in various bathroom fixtures.

Fiberglass

This refers to glass that has been ground to create fibers. It is typically used in bathtubs and shower stalls.

Flapper

Also known as flush ball, it refers to the rubber disc or ball found inside a toilet tank. It facilitates the flushing of water to the toilet tank.

HVAC

HVAC refers to heating, ventilation and air conditioning.

HDPE pipes

HDPE or high-density polyethylene pipes are used in trenchless sewer technology.

Hydro-jetting

This is a device that is used to clear blockages in pipes by using high pressure water.

Low-flow toilet

This is a type of toilet that has been built to help save water.

Pipe inspection

This system uses video in order to record the condition of drains and pipes. In turn, this allows plumbers to know the best solution to a plumbing problem.

Potable water

This refers to safe and clean water that is fit for human consumption.

PVC

PVC means poly vinyl chloride, a type of plastic often used for plumbing and drains.

Risers

These refer to metal or plastic tubes that are connected to supply stop valves.

Septic tank

This is a tank that is used to hold waste when sewer lines and distribution systems connected to treatment facilities are not readily available.

Slab leak

This condition occurs when water leaks beneath either the floor or slab foundation. It may be caused by leaks in the water line or in the sewer.

Snaking

This refers to a method used to clear blockages using a metal wire or coil.

Tankless water heater

In this type of water heater, the need for a storage tank is eliminated. Instead, water is heated as it passes through pipes.

Trenchless sewer

This is a type of plumbing technology which eliminates the need to dig up foundations or landscape when upgrading existing water or sewer lines.

Vitreous China

This is a type of ceramic material that has been treated to become non-porous. It is often used in tiles and bathroom fixtures.

Water leak

This condition occurs when water leaks from one pipe or several pipes in a plumbing system.

Other Plumbing Resources

We are just scratching the surface on common plumbing terminology. Below are some of the best resources on the web for plumbing terminology that you may need to know about.

Safe Plumbing Glossary 

PDF – Safe Water Resources 

Driveway Leaking Water?

Driveway Leaking Water? Call an Emergency Plumber ASAP!

Driveway leaking water can be the sign of a big plumbing problemWater service lines can suddenly leak due to a wide variety of factors. These include age, change in temperature, the type of pipe material used, shifting of the ground, soil conditions and even the growth of the roots of a tree.

If a water service line suddenly leaks, who will be responsible for the repair?

If the leak occurs between the house and the property line, it’s the responsibility of the homeowner. That will include leaks occurring in the driveways. Beyond that, it’s the responsibility of the water utility company.

If your driveway leaking water is causing concern, get an inspection from a reputable San Diego Plumber.

You have to ensure that the problem is immediately addressed by qualified professionals, including an emergency plumber. Otherwise, the longer you wait makes for more water waste. But apart from that, you will also have to set aside enough money for the repaving of your driveway or even the reseeding of your lawn if you wait too long to address the issue.

The key thing to remember about plumbing emergencies, including leaking water lines buried beneath driveways, is that time is of the essence and prompt action is a must.

The first thing that you need to determine is whether you actually have a leak or you have a different problem. For this, you need to locate your external meter which is commonly found in gardens and driveways. After locating the water meter, ask everyone in the household to stop using water. Also, make sure that appliances that use water are shut off, including dishwashers and washing machines.

Locate and turn off the inside stop valve. This is commonly found beneath the kitchen sink. Now, turn on the faucet in the kitchen sink. If your stop valve is working properly, no water should come out.

Next, make one more check inside and outside your home, making sure that nobody is using water. Afterwards, make an initial reading of the water meter and then come back after half an hour for another reading. If you notice that the meter has changed, you have a leak on your property.

Next, you need to call in a Master Plumber in San Diego to pinpoint the actual location of the leak in your driveway. There are some firms that specialize in this specific service while there are other plumbers that can perform all the services you need to remedy your problem, from locating the source of the leak to digging beneath the driveway and patching up or replacing the leaking pipe.

Eight Signs you have a Slab Leak

Slab leak detection San Diego

Top 8 Signs That Indicate You Need Professional – Slab Leak Repair

Home repairs can cause all kinds of headaches. The most “painful” of all is the headache of more expenses. You might consider neglecting the problem, hoping it will “go away” on its own, in an effort to save money. But as any homeowner knows, disregarding a home repair will only cost more money, more stress, and further inconvenience.

This is certainly true of plumbing problems. When you’ve got a leak in your home, neglecting it will only make it worse. And when that problem is a slab leak, it is especially troublesome because it doesn’t become apparent for some time. Instead of leaving holes around your property, with a jackhammer, trying to find the source of the leak, look for these eight signs so you can call a professional plumber for a slab leak repair.

Eight Signs you have a Slab Leak

  1. An increase in your water bills may mean other sources of leaks, but sometimes this could also indicate it’s under the slab. The added cost to your monthly bill is just one of the casualties of slab leak. Wasting 10,000 gallons of water every month from a small hole is another.
  2. You see moisture or mildew on your floor. You might also see cracks in the tile floor. When a leak collects, there is no place for it to go but up and so you’ll see damp spots, sometimes water, on your floor.
  3. You will see cracks in the walls or baseboards. This happens because leaks under the slab cause the foundation to shift. The shifting will affect your entire home, like the walls.
  4. When you walk around barefoot in your home, you feel warm spots. This means that you have a leak with your hot water line.
  5. Water pressure has slowed down significantly. A tiny leak in your water line will lead to a drop in water pressure.
  6. You hear the sound of running water — even when all the faucets are turned off.
  7. The dial on your water meter is still moving — even when all the faucets are off, the toilet isn’t running, and the dishwasher is off.
  8. If you have a swimming pool, you may notice that it frequently loses water. This may indicate a slab leak.

Locating your slab leak doesn’t have to mean destroying your property with a jackhammer. By hiring a professional plumber, experienced in leak detection, the leak can be located quickly using detection equipment, with minimal to no disruption at all to your home.

To schedule a FREE estimate for slab leak detection or slab leak repair, give us a call at 1-800-anytyme

 

The Common Causes of Slab Leaks

What Are the Causes of Slab Leaks?

 

Vista PlumberHow To Identify And Prepare For A Slab Leak

Of all of the things that could go wrong in a home, a slab leak is one of the more unpleasant. Not only does such a leak bring a pause to regular proceedings in the home, but it can cause a hit to the value of the home if the problem is not corrected. In short, a slab leak is not something that anyone wants to have to put up with.

What Is A Slab Leak?

This is a leak below a concrete surface that springs up into the home. It is not a pretty sight to see, and it can cause damage to the home if the homeowner is not responsible enough to take quick action against such a leak.

It is unlikely that most home owners are going to want to wait around to see the damage get any worse than it already is. As such, they need to understand that reacting quickly to this problem is the best solution available to them at this time.

How Did This Leak Happen?

This is something that has to be determined on a case by case basis, but a common culprit is often clay. Clay causes problems for many homeowners because it expands when wet but contracts when it is dry.

If there is clay up under the foundation of the home, this could be putting undo pressure on the pipes, and that in turn could cause a leak in those pipes. When this happens, the slab leak is a likely result.

How Do I Know If I Have A Slab Leak?

There are a few likely signs that one may notice when they are examining if they have a slab leak. For example, if they believe that they hear water running when all water sources have been turned off.

Vista Slab LeaksAlso, extra large utility bills are often a sign that something is wrong with the water. These are things that point towards a slab leak and action should be taken quickly.

How Long Will A Repair Take?

The repair of a slab leak is a process that generally takes about two days so long as the leak has been captured in its early stages.

Those who wait a little longer to get their leak repaired are probably going to face longer repair times. That being said, we strive to get leaks repaired within 2 days.

Are you seeing signs of a slab leak in your Vista home? No time to waste here, Call 1-800-Anytime at (760) 477-2222 to see what is causing that slab leak.